Home Vendor Overture Networks How to configure Overture 5100 carrier Ethernet switch

This is brief guide how to configure Overture 5100 carrier Ethernet switch. It supports VLAN and IPoverture_logo.jpg layer configuration. 

  • To see saved configuration

Overture_ISG5100# config display

It will give you a current configuration which is on system memory. All the syntex of configuration is same as actual commands line you would apply.

See few example below

 

  • To remove switch port

Overture_ISG5100# switch show

Port Switch Entries

         Source    SrcVlan     Destination Pri Action  Label Sig TOS   FCS
-------------------------------------------------------------------------------
            1.1        all             3.1   0   push      8   N   N   N/A
            3.1          8             2.3   0    pop    N/A   N   N   N/A
            4.1          8             2.3   0    pop    N/A   N   N   N/A
 

Overture_ISG5100# switch delete 1.1 vlans-all
Overture_ISG5100# switch delete 3.1 8
Overture_ISG5100# switch delete 4.1 8
Overture_ISG5100#

 

  • To Add switch port

Overture_ISG5100# switch create 1.1 all to 3.1 priority 0 action push 8
Overture_ISG5100# switch create 3.1 8 to 1.1 priority 0 action pop
Overture_ISG5100# switch create 4.1 8 to 1.1 priority 0 action pop

Overture_ISG5100# switch show

Port Switch Entries

         Source    SrcVlan     Destination Pri Action  Label Sig TOS   FCS
-------------------------------------------------------------------------------
            1.1        all             3.1   0   push      8   N   N   N/A
            3.1          8             1.1   0    pop    N/A   N   N   N/A
            4.1          8             1.1   0    pop    N/A   N   N   N/A

 

  • To show L2 class interface

Overture_ISG5100# l2classify sho


                                            Egress         Rate Limt          
RuleName Pri   Port      VLAN   DSCP Pbit   Port Q  Action Cir/Burst  PBit DSCP
-------------------------------------------------------------------------------
 OVR111   1    1.1       any    any  any    3.1 4 PU/  14 100/  100    no   no
 OVR311   1    3.1     15-15    any  any    1.1 4 PO/ n/a  no/    0    no   no

 

  • To configure L2 class interface

Overture_ISG5100# l2classify create OVR111 1 1.1 any-vlan any-dscp any-pbit 3.1 4 push-action 15 100 100 no-pbit no-dscp
Overture_ISG5100# l2classify create OVR311 1 3.1 15-15 any-dscp any-pbit 1.1 4 pop-action no-rate-limit no-pbit no-dscp
Overture_ISG5100# prompt-user on

 

  • To activate port parameters

Overture_ISG5100#  port config 1.1 activate
   Keywords
   ========
   admit-only       - Admit explicitly tagged packets only
   dot1p            - dot1p VLAN priority
   ingress-filt     - VLAN ingress filtering
   jumbo-frames     - Ethernet jumbo frames
   learning         - Bridge learning
   loop-detect      - loopback detection
   policing         - Rate Policing

 

  • To de-activate port parameters

Overture_ISG5100# port config 1.1 de-activate
   Keywords
   ========
   admit-only       - Admit explicitly tagged packets only
   dot1p            - dot1p VLAN priority
   ingress-filt     - VLAN ingress filtering
   jumbo-frames     - Ethernet jumbo frames
   learning         - Bridge learning
   loop-detect      - loopback detection
   policing         - Rate Policing
 

Last Updated (Friday, 25 September 2009 15:34)

 
Smart Link
Search
Statistics
Content View Hits : 2174554
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 68 guests online