Home Vendor Enterasys [Enterasys] How to configure Syslog server


While I was testing Splunk, I need to add more devices to Splunk index pages. This example shows how to configure Enterasys Switch to forward syslog message to the server. It's simple and easy to setup. 

In this example, server's IP is 192.168.77.13 and UDP port 514 is used. Severity level is 8.

 

Enterasys(su)>set logging server 1 ip-addr 192.168.77.12 port 514 severity 8 state enable

To verify

Enterasys(su)>show logging server
     IP Address    Facility   Severity      Description  Port  Status
   --------------------------------------------------------------------
1 192.168.77.12    local4    debugging(8)     default     514   enable
 

 

If you want to change default value to facility local 5 and severity 5, configure below.

Enterasys(su)>set logging default facility local 5 severity 5

 

To see currently logging severity levels for all applications on your devices, type below commands

Enterasys(su)>show logging application all

        Application   Current Severity Level
---------------------------------------------
 89      CLIWEB                   6
 90      SNMP                     6
 91      STP                      6
 92      Driver                   6
 93      System                   6
 94      Stacking                 6
 112     UPN                      6
 118     Router                   6

1(emergencies)  2(alerts)       3(critical)
4(errors)       5(warnings)     6(notifications)
7(information)  8(debugging)
 

 

Last Updated (Thursday, 11 June 2009 15:45)

 
Smart Link
Search
Statistics
Content View Hits : 2174515
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 23 guests online