CiscoNet.com - [Tasman]L2 VLAN management sample configuration

Home

Vendor

Tasman

[Tasman]L2 VLAN management sample configuration

Google Translation

Main Menu

Login Form

Yahoo Network

Merchant Solutions

Latest Articles

- Performs MAC learning and forward intelligently
- VLAN protocol type configurable per interface or globally
- Supports 4095 VLAN ids
- Supported interface; Ethernet, BCP/MLBCP, FR/MLFR, AVC
- Manageable via in-band management VLAN
- Tasman can receive Ethernet packets, encapsulate in VLAN and forward them based on a static VLAN forwarding table
- Packets are tagged inthe inbound direction of an interface, if VLAN tag id is configured on the interfaces
- Packets are untagged in the outbound direction of a VLAN tagged interface

2. Useful commands

- To create a VLAN id

tasman/configure/interface/boundleID/valn> vlanid <#>

; note: You don't need to change MTU size unless it goes above 1522 bytes

- To setup VLAN forwarding

tasman/configure> vlanfwd

Add - Configures a VLAN or a range of VLAN IDs to be forwarded
Enable - Enables or disables VLAN forwarding
Ether_type - Configures the Ethernet type for VLAN forwarding
Management - Accesses the commands for VLAN forwarding management. this allows user to enable in-band management using a VLAN

3. Sample configuration (SR1004)

tasman> conf t
tasman/configure>vlanfwd
tasman/configure/vlanfwd>management
tasman/configure/vlanfwd/management>vlanid 20
tasman/configure/vlanfwd/management>ip_address 10.1.1.200
tasman/configure/vlanfwd/management>disable_ipfwd
tasman/configure/vlanfwd/management>default_route 10.1.1.1 ethernet0
tasman/configure/vlanfwd/management>exit
tasman> save local system.cfg