BGP Community String
----------------------------------------------------------------------
3212:10 Set local-pref to 50
3212:20 Set local-pref to 150

Community Action on
----------------------------------------------------------------------
3212:500x All transit uplinks
3212:510x Transit uplink AS8447
3212:520x Transit uplink AS3320
3212:530x Transit uplink AS8591
3212:540x Transit uplink AS286

3212:600x All Internet Exchanges (IXPs)
3212:610x Slovenian IXPs
3212:620x Austrian IXPs
3212:630x Dutch IXPs

3212:9999 Prefix blackholing

Value of 'x' Action
-----------------------------------------------------------------------
0 Filter announcement, ie. do not announce
1 Prepend once - "3212"
2 Prepend twice - "3212 3212"
3 Prepend thrice - "3212 3212 3212"


Example: 3212:6203 will prepend AS3212 three times to your
announcement towards Austrian Internet Exchange (VIX).

-------------------------------------------------------------------------
Please contact noc-at-triera.net for additional communities



--------------------------------------------------------------------------
Operational issues 24x7: ............ noc-at-triera.net
Operational issues 24x7: ............ + 386 2 228 14 90
Peering requests: ............... peering-at-triera.net
Abuse and spam: ................... abuse-at-triera.net
--------------------------------------------------------------------------

Applying BGP Community string with sample configuration

2. Pick the best BGP community string for your traffic shaping plan (mainly incoming traffic).
Most of ISPs are providing community string with local preference and AS prepending
option. Cannot tell which one is better than the other. It will depend on your global traffic shaping plan.

3. Follow the below commands ( Cisco only )

The below Sample configuration will tag the 10.0.0.0/24 route with [ISP AS]:120 or [ISP AS]:3 and will not tag any other routes.

router#config t
router(config)#ip bgp-community new-format
router(config)#access-list 10 permit 10.0.0.0 0.0.0.255
router(config)#access-list 10 deny any

router(config)#route-map [to-ISP] permit 10
router(config-route-map)#match ip address 10
router(config-route-map)#set community [ISP AS]:120 <---- using Local Preference

or

router(config-route-map)#set community [ISP AS]:3 <------- using AS prepending
router(config-route-map)#route-map [to-ISP] permit 20
router(config-route-map)#exit

router(config)#router bgp [xxxx] <------------------------------- xxxx = customer's ASN
router(config-router)#neighbor x.x.x.x send-community
router(config-router)#neighbor x.x.x.x route-map [to-ISP] out
router(config-router)#exit
router(config)#exit
router#copy running-config startup-config

4. And then, go to www.CiscoNET.com and pick one of route server on the map to see your announcement. If you are using AS prepending option, you will see your AS prepends on route servers. Sometime you might not see your route with particular ISP path.
In most of case it might not be any routing problem, just the route path was dropped at somewhere by BGP best path selection scheme. Try Oregon route server, if you can see your route. The Oregon route server is providing many possible and available paths between BGP speakers and neighbors.
If you don't see your route on there? check other route servers and also check your
BGP configuration. You might need to contact your upstream provider to check what they are learning BGP route from you.

Add as favourites (16) | Views: 152 | E-mail

Be first to comment this article

Write Comment
Please keep the topic of messages relevant to the subject of the article. Personal verbal attacks will be deleted. Please don't use comments to plug your web site. Such material will be removed. Just ensure to *Refresh* your browser for a new security code to be displayed prior to clicking on the 'Send' button. Keep in mind that the above process only applies if you simply entered the wrong security code.
Name:
E-mail
Title:
BBCode:
Comment:
Code:*

Powered by AkoComment Tweaked Special Edition v.1.4.3

---

Please share this article with ;