BGP Community String for NASK AS8308

Home

Routing

BGP Community Attributes List

BGP Community String for NASK AS8308

Google Translation

Main Menu

Login Form

Sections

Latest Articles

BGP Community String

Local-preferences
100 - Customers
50 - Local peerings
35 - Settable by customers or local peerings (see communities)
30 - IXP peerings
10 - Uplinks

BGP Communities used in AS8308

Settable BGP communities:
8308:55521 - prefix is not announced to AS5617
8308:55526 - prefix is not announced to AS8246
8308:55035 - local-preference is lowered to 35

Read-only communities marking prefix origin:
8308:60000, 8308:60100 - Customers
8308:60010 - Uplinks
8308:60030 - IX (DE-CIX)
8308:60050 - Local peerings

8308:5617 - TPNET (AS5617)
8308:8246 - IPartners (AS8246)
8308:8938 - Energis (AS8938)
8308:24748 - ATMAN (AS24748)

Contact Us

Network problems: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Registry contact: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Abuse and spam notification: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

Please send spam and abuse notifications to This e-mail address is being protected from spam bots, you need JavaScript enabled to view it only notifications sent to other mailboxes will be left without action.

Applying BGP Community string with sample configuration

1. Get the latest BGP community string from your ISP/upstream provider or check new.CiscoNET.com web site.

2. Pick the best BGP community string for your traffic shaping plan (mainly incoming traffic). Most of ISPs are providing BGP community string with local preference and AS prepending option. Cannot tell which one is better than the other. It will depend on your global traffic shaping plan.

3. Follow the below commands ( Cisco only )

The below Sample configuration will tag the 10.0.0.0/24 route with [ISP AS]:120 or [ISP AS]:3 and will not tag any other routes.

router#config t
router(config)#ip bgp-community new-format
router(config)#access-list 10 permit 10.0.0.0 0.0.0.255
router(config)#access-list 10 deny any

router(config)#route-map [to-ISP] permit 10
router(config-route-map)#match ip address 10
router(config-route-map)#set community [ISP AS]:120 <---- using Local Preference

router(config-route-map)#set community [ISP AS]:3 <------- using AS prepending
router(config-route-map)#route-map [to-ISP] permit 20
router(config-route-map)#exit

router(config)#router bgp [xxxx] <------------------------------- xxxx = customer's ASN
router(config-router)#neighbor x.x.x.x send-community
router(config-router)#neighbor x.x.x.x route-map [to-ISP] out
router(config-router)#exit
router(config)#exit
router#copy running-config startup-config

4. And then, go to www.CiscoNET.com and pick one of route server on the map to see your announcement. If you are using AS prepending option, you will see your AS prepends on route servers. Sometime you might not see your route with particular ISP path.
In most of case it might not be any routing problem, just the route path was dropped at somewhere by BGP best path selection scheme. Try Oregon route server, if you can see your route. The Oregon route server is providing many possible and available paths between BGP speakers and neighbors.
If you don't see your route on there? check other route servers and also check your
BGP configuration. You might need to contact your upstream provider to check what they are learning BGP route from you.

Add as favourites (25) | Views: 204 | E-mail